Ford F-150 bolt pattern
The 2021–2025 Ford F-150 runs 6x135mm (6x5.31") with a 87.1mm center bore. The pattern has been consistent across the generations listed below.
Bolt pattern finder
Lug count, spacing, center bore and thread size — plus what else shares the pattern.
Wheels that share this pattern
Matching bolt pattern is necessary but not sufficient — center bore and offset still have to work. A hub-centric ring covers a larger bore; a smaller one will not fit at all.
By generation
| Years | Generation | Bolt pattern | Center bore | Thread | Torque |
|---|---|---|---|---|---|
| 2021–2025 | 14th generation (P702) | 6x135mm (6x5.31") | 87.1mm | M14 x 1.5 | 150 lb-ft |
| 2015–2020 | 13th generation (P552) | 6x135mm (6x5.31") | 87.1mm | M14 x 1.5 | 150 lb-ft |
| 2009–2014 | 12th generation (P415) | 6x135mm (6x5.31") | 87.1mm | M14 x 2.0 | 150 lb-ft |
What else shares these patterns
2021–2025 · 6x135mm (6x5.31")
- 2015–2020 Ford F-150 — 87.1mm bore (same bore)
- 2009–2014 Ford F-150 — 87.1mm bore (same bore)
2015–2020 · 6x135mm (6x5.31")
- 2021–2025 Ford F-150 — 87.1mm bore (same bore)
- 2009–2014 Ford F-150 — 87.1mm bore (same bore)
2009–2014 · 6x135mm (6x5.31")
- 2021–2025 Ford F-150 — 87.1mm bore (same bore)
- 2015–2020 Ford F-150 — 87.1mm bore (same bore)
Common questions
What is the bolt pattern on a Ford F-150?
The 2021–2025 Ford F-150 uses 6x135mm (6x5.31") with a 87.1mm center bore and M14 x 1.5 lug studs, torqued to 150 lb-ft.
What is the lug nut torque for a Ford F-150?
150 lb-ft for the 2021–2025 generation, tightened in a star pattern in two or three passes. Re-check after the first 50 to 100 miles on newly mounted wheels — this is when they are most likely to settle and lose clamp load.
What is the center bore on a Ford F-150?
87.1mm for 2021–2025. Aftermarket wheels are often made with a larger bore to fit multiple vehicles; those need hub-centric rings so the hub carries the load instead of the lug studs.